New system setup of ATEasy 2.1d after harddisk damage

Dirk R.
Hamburg, Hamburg

Jul 8, 2015
1 Post

0 ✔  |  ✗ 0  

Re: New system setup of ATEasy 2.1d after harddisk damage

Hello,
I have to install everything new because the old HD crashes.
Now, with a new HD on the old system I installed Win98SE and it's drivers (Grafic, Motherboard,...).
Then I installed ATEasy 2.1d without problems.

But:
When I start ATEasy it detects the hardware key and it's serial number. I enter the password but I'm missing the complete "Edit" menu, the "Save" and "Printing" entries in "File" menu and the "Defaults" entry in "Utilities" menu. It seems to be at a user level 1 not 3.
When I remove the hardware key ATEasy starts in Demo mode but all menu items appear.

At the old system we have all menus with hardware key installed.
Do anyone have a solution?

Best regards,
Dirk

Solution Available
DrATEasy (Ron Y.)
Mission Viejo, CA

Aug 3, 2015
358 Posts

1 ✔  |  ✗ 0  

Re: New system setup of ATEasy 2.1d after harddisk damage

Looks like you have an ATEasy 2.x  Run-Time dongle otherwise it should show the whole menu.

Ronnie



Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]