ATEasy Driver for Agilent M918X
Victor B.
Lake Forest, CA

Sep 27, 2011
91 Posts

ATEasy driver for Agilent M918X

Digital Multimeter Instrument

Supported models: M9181A, M9182A, M9183A

This driver was generated using ATEasy automated Import Function Panel (FP) tool.

The driver uses a DLL: 'AgM918x.DLL'. provided with the M918X software package. It also requires the Agilent I/O libraries be installed.

Software package can be downloaded here:
http://www.home.agilent.com/agilent/editorial.jspx?id=2050245

Regards,
Victor Brode


File Attachment:
AgM918x.drv

Solution Available
Michael W.
Lititz, PA

Sep 12, 2014
30 Posts

Re: ATEasy driver for Agilent M918X

Using the driver, I am able to initialize the session and read a DC voltage.  But when I run the self-test (DMM Utility SelfTest) (AgM918x_self_test), I get an error #17.  I know it is running the self-test because the instrument makes a series of beeping sounds just like it does when I run the Soft Front Panel.  I get a passing message in the Soft Front Panel, but no result using the driver command.  What's the problem?  It's as if I can only use the InstrumentSpecific commands, not the Utility commands. I really need a way to run the self-tests and return a result. Thanks.



Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]