DIO Boards Firmware
Stephane L.
Meylan,

Mar 12, 2012
3 Posts

DIO Boards firmware

Hi,
There are updates for DIO sofware drivers in the download part of the website, but I suppose some of these updates also need firmware updates.
We're using GX5295 with 4.1.54 drivers and 0xB311 firmware (as seen in about panel of GTDIO panel.exe).
Are there any updates (I saw that 4.1.52 requires 0xB930), and where can I get them?
Thanks for any help

Stephane

Tamir B.
Mission Viejo, CA

Mar 12, 2012
5 Posts

Re: DIO Boards firmware

Hi Stephane,

The latest Gx5295 firmware is the attached “2355-000-02__revB_100MHz_b930.jam” file.

DIO firmware upgrade:

1. Download the “2355-000-02__revB_100MHz_b930.jam” file to your system.
2. Open the DIO virtual panel and initialize the Gx5295 board.
3. Click on the About tab and then on the “Upgrade Firmware” button.
4. A file open dialog will open, locate the “2355-000-02__revB_100MHz_b930.jam” and click Open.
5. The firmware upgrade will start, and the progress bar will notify you when it’s done.
6. When done you will need to shut down and reboot your system.

Thanks,
Tamir


File Attachment:
2355-000-02__revB_100MHz_b930.jam

Oscar T.
Trondelag

May 27, 2013
1 Post

Re: DIO Boards firmware

Hi Tamir

Looking at this post i was wondering if you could answer the following:

Any chance of getting a change log for this Firmware update?

Can you roll back to version 0xB311?

whats are the requirements for this FW version? e.g. DioEasy version, GX5295 Driver versio etc.

Thanks
Oscar







Tamir B.
Mission Viejo, CA

May 28, 2013
5 Posts

Re: DIO Boards firmware

Hi Oscar,

Q. "Any chance of getting a change log for this Firmware update?"  
A. What log do you want to change?

Q. Can you roll back to version 0xB311?
A. You can rollback at any time to previous firmware version.

Q. whats are the requirements for this FW version? e.g. DioEasy version, GX5295 Driver version etc.
A. To be fully compatible download the latest DIO setup from our website.

Thanks,
Tamir

Sergio A.
Trondheim, Trondelag

Sep 22, 2016
1 Post

Re: DIO Boards firmware

Hi,

I couldn't find any information related to firmware updated for the GX5295? Is there any?

B.R.
Sergio


Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]