Test Connections
 

Geotest offers two types of signal interface or breakout boards for interfacing to Geotest digital I/O instrumentation. The GT95014 Single-ended Breakout Adpater Board (Figure 1) for the Geotest Digital I/O cards provides an interface between the 68-pin VHDC connectors used on the Geotest DIO cards and 100 mil spaced pins. In addition, the GT95014 provides the option of terminating all of the I/O signals with a matching impedance for a specific UUT / DIO configuration.

GT95014

Figure 1: GT95014


The GT95015 (Figure 2) is a breakout adapter that can be used with all Geotest Digital I/O products that provide differential I/O signals. For ease of access to the digital signals, the GT95015 breaks out the 68-pin VHDC connector (J1) pins to a dual row connector with 100 mil spaced pins, designated J2 on the board. In addition, the GT95015 provides three methods of terminating all of the I/O signals in order to best match the requirements of the UUT and the DIO instrument.

GT95015

Figure 2: GT95015

To learn more about how you can used these board for interfacing to your application, you can look at the following Knowledge Base articles:
GT95014 Digital I/O Single-ended Beakout Adapter Board Product Information
GT95015 Differential Digital I/O Beakout Adapter Board Product Information
(If the Print button is not supported, simply use your
Web browser's "Print" command instead.)

Geotest-Marvin Test Systems, Inc.
1770 Kettering
Irvine, CA 92614
1-949-263-2222
1-888-837-8297

Geotest - Marvin Test Systems, Inc.
©2012 Geotest-Marvin Test Systems, Inc. (www.geotestinc.com). All rights reserved.
Geotest - Marvin Test Systems, Inc. - Geat A Head Start With Geotest