Use this dialog to select the interfaces for which you want to view the actual communication between ATEasy and the instruments it controls. Depending on which interfaces you select, when you run a program, the Monitor window displays the GPIB, RS232/COM Ports, LXI, VXI, and other strings sent or received by ATEasy. By default, all the check boxes are checked.
Click to select any interfaces whose output you want to monitor in the Monitor window.
Check the driver shortcut of the instrument you want to monitor, only interface based driver are monitored.
Type the address of the instrument you want to monitor. Format is hexadecimal (start with 0x) same as shown in the Monitor window address column.
Type the maximum number of records that should be displayed in the Monitor window. After that number is reached old records are removed to accommodate the new records.
Display the number of records that were created and displayed in the Monitor window.
Click here to accept your changes.
Click here to select all interfaces.
Click here to clear all interface choices.