CalCounterSetAcquisitionMode

Sets the board acquisition mode.

CalCounterSetAcquisitionMode (hHandle, nChannel, lAcquisitionMode, plStatus)

Name	Type	Comments
hHandle	LONG	Handle for a Counter.
nChannel	SHORT	Error status to decode.
lAcquisitionMode	LONG	Acquisition mode: 0. aCounterAcquisitionContinuous: The counter continuously makes measurements (default after reset). 1. aCounterAcquisitionSingle: Instrument makes a single measurement. Each call to trigger initiates a new measurement.
plStatus	PLONG	Returned status: 0 on success, negative number on failure.

This function sets a channel’s acquisition mode.

The following example sets channel 0’s acquisition mode to continuous:

LONG lHandle, lStatus;

CalCounterSetAcquisitionMode (lHandle, 0, aCounterAcquisitionContinuous, &lStatus);