REF Standard Driver

REF (Calibrator/Reference Source) Standard Functions
CalRefDmmMeasure	Takes a measurement.
CalRefDmmSetFunction	Sets the currently selected measurement function.
CalRefDmmSetRange	Sets the currently selected measurement function’s range.
CalRefDmmSetReadingRate	Sets the measurement reading rate in terms of Number of Power Line Cycles.
CalRefDmmSetResolution	Sets the measurement resolution.
CalRefGetCalibrationStatus	Returns status of the calibrator’s calibration at the specified calibration program duration.
CalRefGetError	Returns error information.
CalRefGetInfo	Returns information on the model and manufacturer of the Reference.
CalRefGetInfoEx	Returns the manufacturer, model number, serial number, control number, calibration date, and firmware version.
CalRefGetRequiredCalibration	Returns the specified required calibration status.
CalRefInitialize	Initializes the Reference.
CalRefReset	Resets the Reference to power up state.
CalRefSet2Wire	Sets the 2Wire Reference.
CalRefSet4Wire	Sets the 4Wire Reference.
CalRefSetACCurrent	Sets the AC Current Reference.
CalRefSetACVolts	Sets the AC Voltage Reference.
CalRefSetDCCurrent	Sets the DC Current Reference.
CalRefSetDCCurrentRange	Sets the output to DC Current Mode.
CalRefSetDCCurrentRangeMode	Sets the output to DC Current Range Mode.
CalRefSetDCVolts	Sets the DC Voltage Reference.
CalRefSetDCVoltsLimit	Sets the output to DC Voltage limit.
CalRefSetState	Sets the operational state of the Reference.