The following steps are required to perform verification or calibration for your instrument:
1. Start CalEasy.
2. Select the required Program for your instrument from your Program menu. CalEasy should display the program name in its caption bar.
3. Run your program. From the Run menu, select Start. CalEasy will start running your program and will prompt you with the Device Information window. This window is used to select the device/instrument you are about to calibrate or verify and the program’s execution mode. Each program is divided into two portions, Verification task and Calibration task. CalEasy will run these tasks as selected by the Mode field in the window. Enter the required information as described in the next section and click OK.
4. The Program will start execution and perform verification or calibration as required. Upon successful calibration the Certificate tab will show. CalEasy normally automatically saves your certificate and the test log to the folder specified in the options form. You can also print the test log or certificate from the Log or Certificate menu.
5. Optionally, you can perform Verification after Calibration is done by running your program again and selecting Verify only from the Device Information dialog (run step 3– 4 again).