CalEasy

Calibration and Verification Executive

On-Line Book

Manual Scope

The purpose of this manual is to provide all the information necessary for installation, operation, and maintenance of CalEasy - a software package designed to calibrate and verify Marvin Test Solutions’ devices and instruments. This manual assumes the reader has a general knowledge of PC based computers, Windows operating systems, and a general knowledge of modular test equipment.

Manual Organization

The CalEasy manual is organized in the following manner:

Chapter	Content
Overview	Provides an overview of CalEasy’s features and architecture.
Setup and Installation	Provides instructions about how to install CalEasy, system requirements and provides an overview of CalEasy’s folders and files.
Using CalEasy	Provides instructions about how to use the CalEasy software to verify and calibrate instruments.
Device Calibration	Provides a list of Marvin Test Solutions’ devices/instruments that can be calibrated using CalEasy. Each required standards and capabilities such as hardware and cabling are described in order to support the calibration/verification procedure for the supported Marvin Test Solutions instruments.
Standard Drivers	Provides a list of the standard drivers used by the calibration programs and provides a function reference to each standard. The chapter also explains how to create a standard DLL to control an instrument that is not supported by CalEasy.

June 25, 2025

CalEasy

Calibration and Verification Executive

On-Line Book

Manual Scope

Manual Organization

Chapter

Content

Overview

Provides an overview of CalEasy’s features and architecture.

Setup and Installation

Provides instructions about how to install CalEasy, system requirements and provides an overview of CalEasy’s folders and files.

Using CalEasy

Provides instructions about how to use the CalEasy software to verify and calibrate instruments.

Device Calibration

Provides a list of Marvin Test Solutions’ devices/instruments that can be calibrated using CalEasy. Each required standards and capabilities such as hardware and cabling are described in order to support the calibration/verification procedure for the supported Marvin Test Solutions instruments.

Standard Drivers

Provides a list of the standard drivers used by the calibration programs and provides a function reference to each standard. The chapter also explains how to create a standard DLL to control an instrument that is not supported by CalEasy.