Timing Module Specifications

The following are specifications for the GX5105 Timing Module:

Parameter	Min	Typical	Max	Units
Internal Test Clock
Freq. Range	5		50M	Hz
Resolution	The greater of 1 Hz or 0.2%.
Internal B Clock
Freq. Range	1		120	MHz
Resolution	The greater of 1 HZ or 0.2%.
External Clock with Internal Strobe
Freq. Range	0		50	MHz
Pulse width	8			ns
XCLK to OCLK delay	60		70	ns
XCLK to OSTB delay *	50		60	ns
Data setup time to XCLK **	12			ns
Data hold time to XCLK	5			ns
External Clock with External Strobe
Freq. Range
External Clock	0		50	MHz
External Strobe	0		50	MHz
Pulse width
External Clock	8			ns
External Strobe	8			ns
XCLK to OCLK delay	50		60	ns
XSTB to OSTB delay	50		60	ns
Data setup time to XSTB **	12			ns
Data hold time to OSTB	5			ns
External Control Inputs
Input Level High	2.0		5.1	V
Input Level Low	-0.1		0.8	V
Input Current High			10	mA
Input Current Low			10	mA
External Control Outputs
Type	74FCT162245T
Output Level High	2.4		2.4	V
Output Level Low		0.35	0.6	V
Output Current High			20	mA
Output Current Low			20	mA

* Timing depends on the strobe delay setting and typically is XCLK to OCLK timing minus strobe delay setting.

** Setup time depends on the selected memory and is given for a typical configuration.

Timing connector Specifications