Caution - Static-sensitive devices are present. Ground yourself to discharge any static electricity charge.
To reduce the risk of Electro Static Discharge to circuit boards, always observe the following precautions:
|
Caution - Static-sensitive devices are present. Ground yourself to discharge any static electricity charge. |
● Wear a grounding strap.
● Leave the board in the anti-static bag before installation. The anti-static bag protects the board from harmful static electricity.
● Save the anti-static bag to store the board if it is removed from the computer.
● Handle the board only at the edges. Avoid touching components.
● Carefully unpack the board. Do not drop the board or handle it roughly. A hairline fracture can cause unreliable operation.
When you are ready to begin installing:
1. Follow all precautions for discharge static electricity above.
2. Check the contents of the shipping carton to verify that all items match the packing list. (See Packing List below).
3. Inspect the board for damage. Return any damaged units to Marvin Test Solutions immediately. Refer to warranty information included.
4. Return the board to its anti-static bag until ready for installation and setup.
Check the package against the packing list and your purchase order and make certain all purchased items are included. A DIO board package includes required items and may include options and accessories listed below:
Part Name/Description |
Part Function |
Part Number |
DIO board |
Digital input/output and domain timing and control. |
GC5050 |
I/O Module, TTL (GC5050 require one I/O module option) |
I/O Interface, TTL |
GC5910 |
I/O Module, Programmable (GC5050 require one I/O module option) |
I/O Interface, Programmable Levels |
GC5930 |
I/O Module, LVDS (GC5050 require one I/O module option) |
I/O Interface, LVDS (differential) |
GC5960 |
DIO software installation diskette |
Installation of software driver, DIOEasy, examples on-line help and documentations (in PDF format) files. |
N/A |
Connector Interface for GC5050, SCSI to 100 Mil Grid, Single Ended |
UUT I/O Interface |
GT95014 |
Connector Interface for GC5050, SCSI to 100 Mil Grid, Differential |
UUT I/O Interface |
GT95015 |
Connector I/F for GC5050, SCSI to 100 Mil Grid, Single Ended (both 64 & 14 pin) |
UUT I/O Interface |
GT95020 |
2' shielded cable for GC5050 (68 Pin) |
UUT I/O Cable |
GT95021 |
3' shielded cable for GC5050 (68 pin) |
UUT I/O Cable |
GT95022 |
6' shielded cable for GC5050 (68 Pin) |
UUT I/O Cable |
GT95031 |
10' shielded cable for GC5050 (68 Pin) |
UUT I/O Cable |
GT95028 |
Timing ribbon cable, 2 to 16 20-pin connectors |
Connects Timing connector to Master and slaves. |
GT95009/10/11 |