Conditions are a combination of comparisons of the external event input lines to a register. The external event input lines are compared with a 16-bit A, B, C or D register.
Conditions can be based on:
● The register equals the external event input lines.
● The register does not equal the external event input lines.
● The register is greater than the external event input lines.
● The register is less than the external event input lines.
Other available conditions are as follows (these conditions cannot be used with the loop command):
● Bit number 0, 1, 2, 3 in the external event line is high.
● Bit number 0, 1, 2, 3 in the external event line is low.