Caution - Static-sensitive devices are present. Ground yourself to discharge any static electricity charge.
To reduce the risk of Electro Static Discharge to circuit boards, always observe the following precautions:
|
Caution - Static-sensitive devices are present. Ground yourself to discharge any static electricity charge. |
● Wear a grounding strap.
● Leave the board in the anti-static bag before installation. The anti-static bag protects the board from harmful static electricity.
● Save the anti-static bag to store the board if it is removed from the computer.
● Handle the board only at the edges. Avoid touching components.
● Carefully unpack the board. Do not drop the board or handle it roughly. A hairline fracture can cause unreliable operation.
When you are ready to begin installing:
1. Follow all precautions for discharge static electricity above.
2. Check the contents of the shipping carton to verify that all items match the packing list. (See Packing List below.)
3. Inspect the board for damage. Return any damaged units to Marvin Test Solutions immediately. Refer to warranty information included.
4. Return the board to its anti-static bag until ready for installation and setup.
Check the package against the packing list and your purchase order and make certain all purchased items are included. A DIO board package includes required items and may include options and accessories listed below:
Part Name/Description |
Part Function |
Part Number |
Master DIO board |
Digital input/output and domain timing and control. |
GX5150 |
Slave DIO board |
Digital input/output |
GX5151 |
Timing Module (installed on Master board) |
Domain timing and control. |
GX5105 |
I/O Module, TTL (GX5150 & GX5151 both require one I/O module option) |
I/O Interface, TTL. |
GX5910 |
II/O Module, Frequency Doubler (GX5150 & GX5151 both require one I/O module option) |
I/O Interface, Programmable Levels |
GX5920 |
I/O Module, Programmable (GX5150 & GX5151 both require one I/O module option) |
I/O Interface, Programmable Levels |
GX5930 |
I/O Module, PECL (GX5150 & GX5151 both require one I/O module option) |
I/O Interface, PECL |
GX5940 |
I/O Module, LVDS (GX5150 & GX5151 both require one I/O module option) |
I/O Interface, LVDS (differential) |
GX5960 |
I/O Module, TTL (GX5150 & GX5151 both require one I/O module option) |
I/O Interface, TTL (differential) |
GX5970 |
I/O Module, TTL (GX5105 require one I/O module option). |
I/O Interface, TTL |
GX5101 |
GX5150/5151 Circuit Board User Guide |
User information. (This User Guide). |
GX95001 |
Software User's Guide and Programmer's Reference User's Guide |
User information. |
GT95027 |
User information. |
N/A |
|
DIO software installation diskette |
Installation of software driver, DIOEasy, examples and on-line help files. |
N/A |
Connector Interface for GX515x, SCSI to 100 Mil Grid, Single Ended |
UUT I/O Interface |
GT95014 |
Connector Interface for GX515x, SCSI to 100 Mil Grid, Differential |
UUT I/O Interface |
GT95015 |
Connector I/F for GX515x, SCSI to 100 Mil Grid, Single Ended (both 64 & 14 pin) |
UUT I/O Interface |
GT95020 |
2' shielded cable for GX515X (68 Pin) |
UUT I/O Cable |
GT95021 |
3' shielded cable for GX515X (68 Pin) |
UUT I/O Cable |
GT95022 |
10' shielded cable for GX515X (68 Pin) |
UUT I/O Cable |
GT95028 |
2' shielded cable for GT515X (14 Pin) |
UUT Timing Cable |
GT95023 |
3' shielded cable for GT515X (14 Pin) |
UUT Timing Cable |
GT95024 |
Master and Slave to Timing ribbon cable, 3 to 5 20-pin connectors |
Connects Timing Module to Master and slaves. |
GT95009/10/11 |