Marvin Test Solutions provides I/O Modules as interface adapters to meet special interface needs. I/O Modules are daughter cards that mount onto GX515X DIO boards.
The table below identifies Marvin Test Solutions’s family of I/O Modules. These are part of the DIO system and connect to the parent GX515X via two 80-pin headers. Two standoffs provide mechanical rigidity. The boards interface with UUTs and external test equipment through the UUT cabling using 68-pin connectors.
|
I/O Module |
Function |
GX515X |
|
GX5910 |
TTL level |
An I/O Module must be mounted on each GX515X board |
|
GX5930 |
Programmable I/O Voltage level |
I/O Module Application
One I/O Module daughter card is required for each GX515X board and is specified when the GX515X is ordered.
I/O Modules are factory mounted on the GX515X board. The default GX5910 card provides TTL levels. Should interface requirements change, alternate I/O modules can be purchased and installed. Only the I/O Module is changed. You can select an appropriate card type for a UUT interface. Basic DIO main boards are reused.
Specific I/O modules are discussed in the topics:
GX5910 TTL I/O Module, and GX5930 Programmable Level I/O Module
The following topics introduce the I/O Modules as interface adapters to meet special interface needs:
Unpacking, Inspection and Installation Precautions
GX5930 Programmable Level I/O Module
GX5960 Low Voltage Differential Signaling (LVDS) Module