GC5050, GX5050, GX5055, GX5290, GX5290e, GX5295, File
Writes a block of data to the output memory of the specified board (Master or Slave).
DioWriteOutMemory (nHandle, pvMemory, dwStart, dwSize, pnStatus)
Name |
Type |
Comments |
nHandle |
SHORT |
Board or File board handle. |
pvMemory |
PVOID |
Pointer to an array, array data type needs to comply with the I/O width settings and board type, see comments for details. |
dwStart |
DWORD |
Starting address to write. |
dwSize |
DWORD |
Number of steps to write. |
pnStatus |
PSHORT |
Returned status: 0 on success, negative number on failure. |
GX5050/GX5050:
Array data type is Double Word (DWORD) and maximum array size is 1M of double words.
GX5055:
Array data type is Double Word (DWORD) and maximum array size is 512K of double words.
GX5290/GX5290e/GX5295:
Number of Channels |
Array Type |
32 |
Array data type is Double Word (DWORD) when I/O configuration is set to 32-bits width (default). GX5291/GX5291e: Maximum array size is 32M of double words. GX5292/GX5292e: Maximum array size is 64M of double words. GX5293/GX5293e: Maximum array size is 64M of double words. GX5295: Maximum array size is 64M of double words. |
16 |
Array data type is Word (WORD) when I/O configuration is set to 16-bits width (channels 0-15). GX5291/GX5291e: Maximum array size is 64M words. GX5292/GX5292e: Maximum array size is 128M words. GX5293/GX5293e: Maximum array size is 128M words. GX5295: Maximum array size is 128M words. |
8 |
Array data type is Byte (BYTE) when I/O configuration is set to 8-bits width (channels 0-7). GX5291/GX5291e: Maximum array size is 128MB. GX5292/GX5292e: Maximum array size is 256MB. GX5293/GX5293e: Maximum array size is 256MB. GX5296: Maximum array size is 256MB. |
4, 2, 1 |
When configuring the Number of channels to be less than 8 bits (4, 2 or 1) the data can be unpacked after reading it using a Double Word array by using DioDataUnpack function. Array data type is Double Word (DWORD) when I/O configuration is set to 32-bits width (default). GX5291/GX5291e: Maximum array size is 32M of double words. GX5292/GX5292e: Maximum array size is 64M of double words. GX5293/GX5293e: Maximum array size is 64M of double words. GX5295: Maximum array size is 64M of double words. |
Note: The board must be in HALT state before calling this function.
Number of channels |
Input memory Max Number of steps |
Output memory Max Number of steps |
Control memory Max Number of steps |
32 |
67108608 |
67108864 |
67108864 |
16 |
134217216 |
134217728 |
134217728 |
8 |
268434432 |
268435456 |
268435456 |
4 |
536868864 |
536870912 |
536870912 |
2 |
1073737728 |
1073741824 |
1073741824 |
1 |
2147475456 |
2147483648 |
2147483648 |
The following example writes 64 steps to the Master board’s output memory beginning at step 128:
DWORD adwOutput[64];
DioWriteOutMemory (nMasterHandle, adwOutput, 128, 64, &nStatus);
DioWriteCtrlMemory, DioReadCtrlMemory, DioReadInMemory, DioReadOutMemory