Restores the modeline parameters to their defaults.
GxFpga3571ResetModeline (nHandle, pnStatus)
Name |
Type |
Comments |
nHandle |
SHORT |
Handle to a GX3500 board. |
pnStatus |
PSHORT |
Returned status: 0 on success, negative number on failure. |
Calling this function will set the modeline parameters as follows:
Modeline Parameter |
Default Value |
Horizontal Sync |
640 (0x280). |
Horizontal Front Porch |
656 (0x290). |
Horizontal Sync Pulse |
752 (0x2F0). |
Horizontal Back Porch |
800 (0x320). |
Vertical Sync |
480 (0x1E0). |
Vertical Front Porch |
491 (0x1EB). |
Vertical Sync Pulse |
493 (0x1ED). |
Vertical Back Porch |
524 (0x20C). |
The following example resets the modeline parameters:
GxFpga3571ResetModeline (nHandle, &nStatus);