The purpose of this manual is to provide all the necessary information to install, use, and maintain the GX3500 and expansion boards. This manual assumes the reader has a general knowledge of PC based computers, Windows operating systems, and some understanding of digital I/O.
This manual also provides programming information using the GX3500 driver (referred in this manual GXFPGA). Therefore, good understanding of programming development tools and languages may be necessary.
The GX3500 manual is organized in the following manner:
Chapter |
Content |
Introduces the GX3500 manual. Lists all the supported boards and shows warning conventions used in the manual. |
|
Describes the GX3500 features, board description, its architecture, specifications and the panel description and operation. |
|
Provides instructions on how to install a GX3500board and the GXFPGA software. |
|
Provides a list of the GXFPGA software driver files, general purpose and generic driver functions, and programming methods. Discusses supported application development tools and programming examples. |
|
Provides an example of how to use the Quartus II to design and FPGA and then load and test the design using the GXFPGA panel. |
|
Describes how to design a GX3500 expansion board and describes several standard expansion boards available from Marvin Test Solutions. |
|
Provides a list of the GX3500 driver functions. Each function description provides syntax, parameters, and any special programming comments. |
Copyright © 2003-2024 by Marvin Test Solutions. All rights reserved.