The following list is a summary of functions available for the GX3748:
Driver Functions |
Description |
Gx3748ComparatorsGetThreshold |
Returns the specified group comparator programmed threshold or window voltage. |
Gx3748ComparatorsReadStat |
Returns the specified group channel comparator state. |
Gx3748ComparatorsReadStates |
Returns all the specified group channels comparators states. |
Gx3748DigitizerArm |
Arm or disarm the specified digitizer groups. |
Gx3748DigitizerGetGroupStatus |
Returns the specified digitizer’s group number acquisition status. |
Gx3748DigitizerGetSamplesCount |
Returns the specified group’s channel number of samples to acquire. |
Gx3748DigitizerGetSamplesCounter |
Returns the accumulated samples on all active groups in real time. |
Gx3748DigitizerGetSamplesPeriod |
Return the digitizer samples period time. |
Gx3748DigitizerGetSource |
Returns the source of the specified digitizer group. |
Gx3748DigitizerGetStatus |
Returns the digitizer acquisition status. |
Gx3748DigitizerGetTriggerMode |
Returns the digitizer specified group trigger mode. |
Gx3748DigitizerGetTriggerThreshold |
Returns the digitizer specified group trigger threshold. |
Gx3748DigitizerHalt |
Sets the digitizer in halt state, and halts any acquisition currently in progress. |
Gx3748DigitizerReadSampleCount |
Returns the actual samples the specified digitizer group acquired. |
Gx3748DigitizerReadTriggerTimestamp |
Reads the trigger time stamp from the acquired group’s data. |
Gx3748DigitizerReadWaveform |
Returns a buffer with the specified digitizer group acquired data. |
Gx3748DigitizerReset |
Reset all 3 Digitizer groups. |
Gx3748DigitizerSetSamplesCount |
Sets the specified group’s channel number of samples to acquire. |
Gx3748DigitizerSetSamplesPeriod |
Sets the digitizer samples period time. |
Gx3748DigitizerSetSource |
Sets the source of the specified digitizer group. |
Gx3748DigitizerSetTriggerMode |
Sets the digitizer specified group trigger mode. |
Gx3748DigitizerSetTriggerThreshold |
Sets the digitizer specified group trigger threshold. |
Gx3748DigitizerSoftwareTrigger |
Generates a software trigger. |
Gx3748ComparatorsSetThreshold |
Sets the specified group comparator programmed threshold or window voltage. |
Gx3748EventCaptureClearMemory |
Clear the specified event capture memory content and set the memory counter to zero. |
Gx3748EventCaptureGetHoldoffTime |
Returns the specified event capture memory Holdoff Time in uSec. |
Gx3748EventCaptureGetMode |
Returns the specified event capture memory mode. |
Gx3748EventCaptureGetSampleRate |
Returns the sampling rate, only event capture memories which are to continuous mode are affected. |
Gx3748EventCaptureGetSource |
Returns the specified event capture memory input channel and group number. |
Gx3748EventCaptureGetState |
Returns the specified event capture memory state. |
Gx3748EventCaptureReadMemory |
Returns the specified event capture memory content, time stamp and voltage logical levels. |
Gx3748EventCaptureReadMemoryCount |
Returns the number of captured events in the specified event capture memory. |
Gx3748EventCaptureReadTimestampCounter |
Returns the time stamp counter value in uSec. |
Gx3748EventCaptureResetTimestampCounter |
Resets the time stamp counter to zero. |
Gx3748GetBoardSummary |
Returns the board information. |
Gx3748GetCalibrationInfo |
Return the board calibration information. |
Gx3748EventCaptureSetHoldoffTime |
Sets the specified event capture memory Hold off Time in uSec. |
Gx3748EventCaptureSetMode |
Sets the specified event capture memory mode. |
Gx3748EventCaptureSetSampleRate |
Sets the sampling rate, only event capture memories which are to continuous mode are affected. |
Gx3748EventCaptureSetSource |
Sets the specified event capture memory input channel and group number. |
Gx3748EventCaptureSetState |
Sets the specified event capture memory state. |
Gx3748EventCaptureSoftwareTrigger |
Issue a software trigger when the specified event capture memory set to continuous mode. |
Gx3748Initialize |
Initializes the driver for the board at the specified slot number. The function returns a handle that can be used with other GX3748 function. |
Gx3748InitializeVisa |
Initializes the driver for the specified PXI slot using the default VISA provider. |
Gx3748IRQDisableAllSources |
Disables all the channels in all three groups IRQ states. |
Gx3748IRQGetSourceChannelState |
Returns the specified channel in the group IRQ generation state. |
Gx3748IRQGetSourceGroupState |
Returns all 16 channels in the specified group IRQ generation states. |
Gx3748IRQSetSourceChannelState |
Sets the specified channel in the group IRQ generation state. |
Gx3748IRQSetSourceGroupState |
Sets all 16 channels in the specified group IRQ generation states. |
Gx3748Measure |
Measure the specified group channel. |
Gx3748MeasureGetInputSource |
Returns the specified group’s channel connected to the measurement unit. |
Gx3748MeasureGetLastTriggeredData |
Returns the last triggered data using one of the PXI Trigger Bus lines. |
Gx3748MeasureGetStatus |
Returns the triggered data using one of the PXI Trigger Bus lines measurement status. |
Gx3748MeasureGetTriggerSource |
Returns the measurements unit trigger source. |
Gx3748MeasureSetInputSource |
Sets the specified group’s channel connected to the measurement unit. |
Gx3748MeasureSetTriggerSource |
Sets the measurement unit trigger source. |
Gx3748Panel |
Opens a virtual panel used to interactively control the GX3748. |
Gx3748ReadConnectorId |
Returns the level of the connector ID pins. |
Gx3748Reset |
Resets the GX3748 to the default state. |
Gx3748ResistorsGetState |
Returns the specified group channel resistor type (pullup or pulldown) state. |
Gx3748ResistorsGetStates |
Returns all the specified group channels resistor type (pullup or pulldown) states. |
Gx3748ResistorsReset |
Disconnect all groups’ channels pullup and pulldown resistors. |
Gx3748ResistorsSetState |
Sets the specified group channel resistor type (pullup or pulldown) state. |
Gx3748ResistorsSetStates |
Sets all the specified group channels resistor type (pullup or pulldown) states. |
Gx3748TriggerClearAllStatus |
Clears all 16 channels in all three groups trigger status flags. |
Gx3748TriggerClearChannelStatus |
Clears the specified channel in the specified groups trigger status flag. |
Gx3748TriggerClearGroupStatus |
Clears all 16 channels in the specified groups trigger status flags. |
Gx3748TriggerDisableAllSources |
Disables all the channels in all three groups trigger states. |
Gx3748TriggerDisableAllPxiTriggerStates |
Disables all the trigger to PXI Trigger channels. |
Gx3748TriggerGetChannelAssertTime |
Returns the specified channel in the specified group trigger assert time in milliseconds. |
Gx3748TriggerGetChannelMode |
Returns the specified group channel trigger mode. |
Gx3748TriggerGetChannelToPxiTriggerState |
Returns the specified channel in the group PXI trigger generation state. |
Gx3748TriggerGetGroupToPxiTriggerState |
Returns all 16 channels in the specified group PXI trigger generation states. |
Gx3748TriggerGetOutputPxiTrigger |
Returns the specified trigger out to PXI Trigger bus line. |
Gx3748TriggerReadAssertCounter |
Reads the current assert time counter for the specified group channel. |
Gx3748TriggerReadChannelStatus |
The function reads back the current trigger status on the specified group channel. |
Gx3748TriggerReadGroupStatus |
The function reads back the current trigger status of all the 16 channels in the specified group channel. |
Gx3748TriggerSetChannelAssertTime |
Sets the specified channel in the specified group trigger assert time in milliseconds. |
Gx3748TriggerSetChannelMode |
Sets the specified group channel trigger mode. |
Gx3748TriggerSetGroupAssertTime |
Sets all 16 channels in the specified group trigger assert time in milliseconds. |
Gx3748TriggerSetGroupMode |
Sets all the specified group channels with the same trigger mode. |
Gx3748TriggerSetOutputPxiTrigger |
Sets the specified trigger out to PXI Trigger bus line. |
Gx3748TriggerSetChannelToPxiTriggerState |
Sets the specified channel in the group PXI trigger generation state. |
Gx3748TriggerSetGroupToPxiTriggerState |
Sets all 16 channels in the specified group PXI trigger generation states. |