J3 Timing Signals Connector

This section describes the GX5296 J3 Timing connector and associated signals (used only on a Master). This interface uses a 68-pin VHD connector. The following table lists the Timing signals:

Pin
Name
Function
Type
1-7
EXT0- EXT6
Reserved (not used).
I
8
NC
No Connection.
 
9
Aux 0
PMU/Input/Output Functions.
I/O
10
Aux 1
PMU/Input/Output Functions.
I/O
11
Aux 2
PMU/Input/Output Functions.
I/O
12
Aux 3
PMU/Input/Output Functions.
I/O
13
XMeasure
Ext-Measurement (Not to be used).
I
14-16
NC
No Connection.
 
17
Aux 4
Reserved.
O
18
Aux 5
Reserved.
O
19
NC
No Connection.
 
20
NC
No Connection.
 
21
NC
No Connection.
 
22
Aux 6
Reserved.
O
23
NC
No Connection.
 
24
Aux 7
Reserved.
O
25
NC
No Connection.
 
26
Aux 8
Reserved.
I
27
Aux 9
Reserved.
I
28
Aux 10
Reserved.
I
29
Aux 11
Reserved.
I
30
SV
Super Voltage Input (Requires Factory Configuration).
I
31
Aux GP1
Reserved.
I
32
Aux GP2
Reserved.
I
33
NC
No Connection.
 
34-64
GND
Ground.
G

J3 68-Pin Timing / Aux Signals

Notes:

1.    Output functions that can be routed to the Aux channels via GtDio6xChannelSetAuxiliaryOutputSignal() API::

●     Sequence Active.

●     Vector Fail.

●     Vector Clock.

●     T0 CLK.

●     Sequence Clock.

●     PXI 10MHz Clock.

●     Record Active Status.

●     Counter Active.

●     Counted Loop.

●     Load Loop Counter.

●     Gosub Active.

●     Last Sequence.