GtWaveArbSetWaveformLength

GX1110, GX1120

Arbitrary Waveform Generator mode only.

Sets the waveform start address and length.

GtWaveArbSetWaveformLength (nHandle, nChannel, dwStartAddress, dwLength, pnStatus)

Name	Type	Comments
nHandle	SHORT	Handle to a GX11X0 board.
nChannel	SHORT	Specified Channel number. GX1120: 0 = GTWAVE_CHANNEL_A: Channel A. GX1120: 0 = GTWAVE_CHANNEL_A: Channel A. 1 = GTWAVE_CHANNEL_B: Channel B.
dwStartAddress	DWORD	GX1120: Waveform start address, any even value between 0 and 2097148 that can be divided by 4. GX1120: Waveform start address, any even value between 0 and 33554430 that can be divided by 2.
dwLength	DWORD	GX1120: Waveform length can be any value between 4 and 2097152 that can be divided by 4. E.g. to run a waveform of 4096 steps starting from step 0, start address will be 0 and length be 4096. GX1120: Waveform length can be any value between 2 and 33554432 that can be divided by 2.
pnStatus	PSHORT	Returned status: 0 on success, negative number on failure.

The following example runs a waveform of 4096 steps starting from step 4:

GtWaveArbSetWaveformLength (nHandle, GTWAVE_CHANNEL_A, 4, 4096, &nStatus);