Caution
- Static sensitive devices are present. Ground yourself
to discharge static.
This section includes general hardware installation procedures for the GX1034 board and installation instructions for the GX1034 (GXCAL) software. Before proceeding, please refer to the appropriate chapter to become familiar with the board being installed.
To Find Information on.. |
Refer to.. |
Hardware Installation |
Installation and Connections |
GX1034 Driver Installation |
Installation and Connections |
Programming the Board |
Programming the Board |
GX1034 Function Reference |
Functions Reference |
All GX1034 boards have the same basic packing list, which includes:
1. GX1034 Board
2. GX1034 Driver Disk
After removing the board from the shipping carton:
Caution
- Static sensitive devices are present. Ground yourself
to discharge static.
1. Remove the board from the static bag by handling only the metal portions.
2. Be sure to check the contents of the shipping carton to verify that all of the items found in it match the packing list.
3. Inspect the board for possible damage. If there is any sign of damage, return the board immediately. Please refer to the warranty information at the beginning of the manual.
All GX1034 instrument boards are designed for use with a 3U or 6U cPCI or PXI compatible chassis. The software is compatible with any computer system running Windows XP SP3, VISTA, 7, 8, and 10 (32/64 bit) operating systems. In addition, Microsoft Windows Explorer version 4.0 or above is required to view the online help.
Each board requires one unoccupied 3U PXI bus slot.