Initializes the driver for the specified PXI slot using the HW device driver.
GxCntInitialize (nSlot, pnHandle, pnStatus)
Name |
Type |
Description |
nSlot |
SHORT |
Counter board slot number. See Comments. |
pnHandle |
PSHORT |
Returned Handle for a Counter board. |
pnStatus |
PSHORT |
Returned status: 0 on success, 1 on failure. |
The Marvin Test Solutions HW device driver is installed with the driver and is the default device driver. The function returns a handle that for use with other Counter functions to program the board. The function does not change any of the board settings.
The specified PXI slot number is displayed by the PXI/PCI Explorer applet that can be opened from the Windows Control Panel. You may also use the label on the chassis below the PXI slot where the board is installed. The function accepts two types of slot numbers:
A combination of chassis number (chassis # x 256) with the chassis slot number. For example 0x105 (chassis 1 slot 5).
Legacy nSlot as used by earlier versions of HW/VISA. The slot number contains no chassis number and can be changed using the PXI/PCI Explorer applet (1-255).
The following example initializes a Counter board at PXI chassis 2 slot 7.
SHORT nHandle, nStatus;
GxCntInitialize(0x207, &nHandle, &nStatus);
if (nHandle==0)
{
printf("Unable to Initialize the board")
return;
}
GxCntInitalizeVisa, GxCntGetErrorString, GxCntReset