Getting Started

This section includes general hardware installation procedures for the GC2200/GTX2200 board and installation instructions for the GC2200/GTX2200 (GXCNT) software. Before proceeding, please refer to the appropriate chapter to become familiar with the board being installed.

To Find Information on..
Refer to..

GXCNT Software Installation

Installation and Connections

Hardware/Board Installation

Installation and Connections

Programming

Programming the Board

Software Function Reference

Functions Reference

Packing List

All GC2200/GTX2200 boards have the same basic packing list, which includes:

  1. GC2200/GTX2200 Board

  2. Disk with GXCNT Software

Unpacking and Inspection

After removing the board from the shipping carton:

CautionCaution - Static sensitive devices are present. Ground yourself to discharge static.

  1. Remove the board from the static bag by handling only the metal portions.

  2. Be sure to check the contents of the shipping carton to verify that all of the items found in it match the packing list.

  3. Inspect the board for possible damage. If there is any sign of damage, return the board immediately. Please refer to the warranty information at the beginning of the manual.

System Requirements

The GXTX2200 instrument boards are designed for use with a 3U or 6U cPCI or PXI compatible chassis. The software is compatible with any computer system running Windows (32-bit or 64 bit) that was released prior to the release date of this software.

Each GXTX2200 board requires one unoccupied 3U PXI bus slot. GC2200 requires one PCI slot.