Sets the single channel resistance.
Gx1164SetSingleChannelResistance (nHandle, nChannel, dValue, pnStatus)
Name |
Type |
Description |
nHandle |
SHORT |
Handle to a GX1164 board. |
nChannel |
SHORT |
Channel number: 1-8. |
dValue |
DOUBLE |
Resistance value. See comments. |
pnStatus |
PSHORT |
Returned status: 0 on success, negative number on failure. |
The following table describes the rage and resolution for each of the available double channels:
Model |
Channel |
Range(Ohm) |
Resolution(Ohm) |
GX1164 |
1, 3, 5, 7 |
1W-256KW |
1W |
2, 4, 6, 8 |
256W-64KW |
1W |
|
GX1642 |
1, 3, 5, 7 |
2W-512KW |
2W |
2, 4, 6, 8 |
512W-128KW |
2W |
|
GX1164-4 |
1, 3, 5, 7 |
4W-1024KW |
4W |
2, 4, 6, 8 |
1024W-256KW |
4W |
|
GX1164-8 |
1, 3, 5, 7 |
8W-2048KW |
8W |
2, 4, 6, 8 |
2048W-512KW |
8W |
Use the Gx1164GetSingleChannelResistance to determine the actual value set.
The following example sets channel 1 / 2 to 1271 Ω
SetDoubleResistance(nHandle, 3, 1271.0, &nStatus)
Gx1164GetSingleChannelResistance, Gx1164SetDoubleChannelResistance