Gx5641GetChannelTTLPortDirection

Purpose

Returns the specified channel Port Direction.

Syntax

Gx5641GetChannelTTLPortDirection (nHandle, nChannel, pnDirection, pnStatus)

Parameters

Name
Type
Description
nHandle
SHORT
Handle to a GX5641 board.
nChannel
SHORT
Channel range is: GX5641_FIRST_CHANNEL (0) to GX5641_LAST_CHANNEL (63).
pnDirection
PSHORT
The channel TTL Port Direction can be as follows:
0. GX5641_CHANNEL_PORT_INPUT – channel port is set as input.
1. GX5641_CHANNEL_PORT_OUTPUT – channel port is set as output.
pnStatus
 
PSHORT
Returned status: 0 on success, negative number on failure.

Comments

For protection, by default all channels are disabled after power-up and reset. The channels can be enabled and or disabled by calling Gx5641SetChannelOutputState.

Note: The channel should be set to Static I/O mode prior calling this function by calling Gx5641SetChannelMode otherwise the function returns an error.

Example

The following example returns channel 0 TTL Port Direction:

 

SHORT nDirection;

Gx5641GetChannelTTLPortDirection (nHandle, 0, &nDirection, &nStatus);

 

See Also

Gx5641SetChannelTTLPortDirection, Gx5641SetChannelTTLPort, Gx5641SetChannelMode, GxPioGetErrorString