Gx5733ModuleSetOutputStrobeWidth

Applies To

GX5702, GX5704

Purpose

Sets the Module’s Output Strobe Width.

Syntax

Gx5733ModuleSetOutputStrobeWidth (nHandle, nPort, nStrobeWidth, pnStatus)

Parameters

Name
Type
Description
nHandle
SHORT
Handle to a GX5733 board.
nPort
SHORT
Module port 0 (GX5733_PORT0) only.
nStrobeWidth
SHORT
Integer value representing the Output Strobe Width in nSec. Strobe Width value range is 50 to 5000 with resolution of 50 nSec.
pnStatus
PSHORT
Returned status: 0 on success, negative number on failure.

Example

The following example set module port 0 strobe width to 100nSec:

 

SHORT nStatus;

Gx5733ModuleSetOutputStrobeWidth (nHandle, GX5733_PORT0, 2, &nStatus);

 

See Also

Gx5733ModuleGetOutputStrobeWidth, Gx5733ModuleSetStrobeSource