Note – It is
recommended to calibrate the counted board every 12 months.Marvin Test Solutions offers Automatic In-System Calibration software for the power supplies boards. The In-System Calibration requires purchasing a license from Marvin Test Solutions. The Automatic In-System Calibration can be performed through the virtual panel or through the driver function calls. The support for the Automatic In-System Calibration needs to be activated by running the GXPS-VCAL license setup in order to be used by the virtual panel and the driver functions.
The calibration program provides an easy-to-use Automatic In-System Calibration procedure, which uses a calibration front panel or Driver function calls. This allows for calibration without the need to remove the power supply board from a rack or system. The calibration virtual front panel provides an interactive step-by-step process that ensures proper and accurate calibration.
Note – It is
recommended to calibrate the counted board every 12 months.
The following provides information regarding:
Installation of the GXPS-CAL license setup.
Calibration required instruments for the calibration.
Connections diagram.
Running calibration from the virtual panel.
Calibration Example program (running calibration using API calls).
The instrument should be calibrated on a regular interval determined by the measurement accuracy requirements of your application. A 1-year interval is adequate for most applications. Accuracy specifications are warranted only if adjustment is made at regular calibration intervals. Accuracy specifications are not warranted beyond the 1-year calibration interval. Marvin Test Solutions does not recommend extending calibration intervals beyond 2 years for any application.