GxSmuTrigSetExternalTriggerToGroup

GX3116e

Sets the specified group’s external trigger state.

GxSmuTrigSetExternalTriggerToGroup (nHandle, nGroup, nState, pnStatus)

Name	Type	Description
nHandle	SHORT	Handle to a GX3116e board.
nGroup	SHORT	Specifies the group number, group number can be as follows: 0. GX3116_GROUP_A_CHANNELS_1_TO_8: Group a contains channel 1 through 8 1. GX3116_GROUP_B_CHANNELS_9_TO_16: Group a contains channel 9 through 16
nState	SHORT	Sets the state specified group’s external trigger as follows: 0. GXSMU_TRIGGER_DISABLE: specified group’s external trigger is disabled 1. GXSMU_TRIGGER_ENABLE: specified group’s external trigger is enabled
pnStatus	PSHORT	Returned status: 0 on success, negative number on failure.

The function sets the specified group’s external trigger state. The group’s external trigger is connected to the front connector J3 pin 59.

The following example enable external trigger to group B, channels 9-16, and returns the settings:

SHORT nState, nStatus;

GxSmuTrigSetExternalTriggerToGroupnHandle, GX3116_GROUP_B_CHANNELS_9_TO_16, GXSMU_ TRIGGER_ENABLE, &nStatus);

GxSmuTrigGetExternalTriggerToGroupnHandle, GX3116_GROUP_B_CHANNELS_9_TO_16, &nState, &nStatus);