Caution - Static sensitive devices are present. Ground yourself to discharge static.
This section includes general hardware installation procedures for all GXSW switching instruments and installation instructions for the GXSW software. Before proceeding, please refer to the appropriate chapter to become familiar with the board being installed.
To Find Information on.. |
Refer to.. |
GXSW driver Installation |
|
Programming the boards |
|
GXSW Reference Functions |
|
Specific GXSW boards (e.g. GX6264, GX6315, etc.) and their driver functions |
The User’s Guide for the specific board |
All GXSW boards have the same basic packing list, which includes:
1. GXSW User’s Guide
2. The specific GxXXXX board User’s Guide (e.g. GX6264 User’s Guide)
3. GXSW DVD.
4. GXSW Switching instrument
5. Mating Connector(s)
After removing the board from the shipping carton:
|
Caution - Static sensitive devices are present. Ground yourself to discharge static. |
1. Remove the board from the static bag by handling only the metal portions.
2. Be sure to check the contents of the shipping carton to verify that all of the items found in it match the packing list.
3. Inspect the board for possible damage. If there is any sign of damage, return the board immediately. Please refer to the warranty information at the beginning of the manual.
The 3U instrument boards are designed for use with a 3U or 6U cPCI or PXI compatible chassis. 6U boards can be only used on a 6U chassis. Each board requires one unoccupied slot. The software is compatible with any computer system running Windows XP SP3, or newer (32/64 bit) operating systems.