TANGO Test Log

Company :
Project : TANGO Aquila Test Bench
Program : STAR_SBR_TEST
Serial Number : 10537
Start Time : 12/18/13   09:42:31
UUT Part Number :

Task 4 : CKTST 4 : (D1D3)RNG GDS Commands

# Name Pin - Value - Result Status
001 Test 4_1 : (D1)HCD - OUT DEC4 output signal test P1-123 - "Correct" - "Correct" Pass
002 Test 4_2 : (D1)HCD - OUT DEC8 output signal test P1-123 - "Correct" - "Correct" Pass
003 Test 4_3 : (D1)HDE - OUT DEC4 output signal test P1-125 - "Correct" - "Correct" Pass
004 Test 4_4 : (D1)HDE - OUT DEC8 output signal test P1-125 - "Correct" - "Correct" Pass
005 Test 4_5 : (D3)SYRAF - OUT output signal test P1-121 - "Correct" - "Correct" Pass
006 Test 4_6 : (D3)SYREC - OUT output signal test P1-119 - "Correct" - "Correct" Pass

Task 5 : CKTST 5 : (D0D2E)FULL CHAIN TEST

# Name Pin Unit Tolerence Value Result Status
001 Test 5_1 : (D0)max level position HZ +/ -2.000 0.000 0.001 Pass
# Name Pin Unit Min Max Result Status
002 Test 5_2 : (D0)max level (MAX ADC -) dB 2.600 3.600 2.740 Pass
003 Test 5_3 : (D0)average foundation level(MAX ADC -) dB 95.000 95.000 Pass
004 Test 5_4 : (E1)Bandwidth ripple dBcc 1.000 0.100 Pass
005 Test 5_5 : (D2)command SHIFT14 validaton test P1-125 dB 5.800 6.200 6.040 Pass
006 Test 5_6 : (D2)command SHIFT16 validaton test P1-125 dB 5.800 6.200 6.020 Pass
# Name Pin Unit Tolerence Value Result Status
007 Test 5_7 : (E2)Gain complet test(MAX ADC -) MAX ADC - dB +/ -0.500 3.000 2.730 Pass
# Name Pin Unit Min Max Result Status
008 Test 5_8 : (E3)Compression point test J1 dB -32.000 -31.450 Pass
# Name Pin Unit Tolerence Value Result Status
009 Test 5_9 : (E4)Limit level(MAX ADC -) MAX ADC- dB +/ -0.500 1.500 1.660 Pass
010 Test 5_10 : (E5)-3dB bandwidth test J1 dB +/ -0.100 2.400 2.430 Pass
# Name Pin Unit Min Max Result Status
011 Test 5_11 : (E6)Noise factor test dB 15.000 14.030 Pass
012 Test 5_12 : (E7)Offset DAP(MAX ADC -) MAX ADC - dB 70.000 88.850 Pass
013 Test 5_13 : (E8)1 tone linearity test L1-L2 dBc 65.000 95.280 Pass
014 Test 5_14 : (E9)rejection of the stripe image L1-L2 dBc 54.000 -56.000 Fail*
015 Test 5_15 : (E10)Selectivity test (for LO1 frequency = 3575.42MHz) Y-X dB 45.000 69.110 Pass
016 Test 5_16 : (E10)Selectivity test (for LO1 frequency = 3625.42MHz) Y-X dB 45.000 73.350 Pass
017 Test 5_17 : (E10)Selectivity test (for LO1 frequency = 3675.42MHz) Y-X dB 45.000 86.920 Pass
018 Test 5_18 : (E10)Selectivity test (for LO1 frequency = 3725.42MHz) Y-X dB 45.000 81.870 Pass
019 Test 5_19 : (E10)Selectivity test (for LO1 frequency = 3775.42MHz) Y-X dB 45.000 87.440 Pass
# Name Pin - Value - Result Status
020 Test 5_20 : (E11)Parasitic striple in band - "Correct" - "Correct" Pass

...Application aborted.