NT5000-5100 Series

Home » » NT5000-5100 Series   (ISA )

ROM Emulator Card

  • UUT runs unmodified and at full speed
  • No special fixturing required
  • Only one generic pod is required
  • New processors can be added with just a software update
  • The user needs to know ONLY one high level language set of commands to use the ROM Emulation card
  • No assembly language is required to use the basic functions of the ROM Emulation card

  • Basic functions include Read, Write, RAM test, ROM CHECKSUM, Fill, Copy, Move, etc.
  • Basic diagnostics are available to troubleshoot a dead kernel

*****Product Availability*****

This product has been discontinued.

The initial release of this product was approximately 1990.

Please contact the factory for availability and alternate product offerings.


ROM Emulation is a powerful and versatile method of microprocessor testing. ROM emulation has emerged as the technique of choice for microprocessor test and diagnostic applications. A microprocessor-based board is tested by replacing the boot ROMs on the Unit Under Test (UUT) with memory emulation pods. Each pod handles 8 bits of the data bus. Processors from 8 to 32 bits can be controlled with 1 to 4 pods (even the most advanced CPUs such as the Intel Pentium generally use only an 8-bit boot path). The emulator takes control of the UUT by re-setting the processor and under the test program's control (monitor program) exercises all functions on the board. Synchronization with the UUT is automatic and requires no additional hardware or connections.


ROM emulation uses a high level language that enables the user to focus on development of the test procedure (rather than on learning new opcodes of the tested CPU) allowing rapid transition from one test program development to another with minimum learning time. The controlling link is transparent to the user.

Programming and Software

The board is supplied with a 32-bit DLL driver. Various interface files provide access to the DLL from programming tools and languages such as ATEasy, LabVIEW, C/C++, Microsoft Visual Basic®, Delphi, and more. The available virtual panel can be used to interactively monitor and control the instrument from a window that displays the instrument's current settings and measurements.
On-Line help file and PDF User's Guide provides documentation that includes instructions for installing, using and programming the board.


  • Automated Test Equipment (ATE)
  • Workstation Service and Repair
  • Engineering Evaluation
  • Microprocessor Board Emulation