The section describe the functions reference. Each function description contains the function name, purpose, syntax, a short description, parameters and types, comments, an example (written in C), and a "See Also" section.
The following topics are available:
Driver Functions |
Description |
COUNTER Standard Functions |
|
CalCounterInitialize |
Initializes the COUNTER. |
CalCounterGetError |
Returns error information. |
CalCounterGetInfo |
Returns information on the model and manufacturer of the COUNTER. |
CalCounterReset |
Resets the COUNTER to power up state. |
CalCounterMeasure |
Reads a single measurement. |
CalCounterSetAcquisitionMode |
Sets the board acquisition mode. |
CalCounterSetDigitalFilter |
Sets the board digital filter settings. |
CalCounterSetFunctionPulseWidth |
Sets the function mode to Pulse Width. |
CalCounterSetGateTime |
Sets the Gate time. |
CalCounterSetImpedance |
Sets the specified channel input Impedance. |
CalCounterSetSlope |
Sets the specified channel input slope. |
CalCounterSetTriggerLevel |
Sets the specified channel input trigger level. |
DMM (Digital Multimeter) Standard Functions |
|
CalDmmGetFunction |
Returns the function that the DMM is currently set to. |
CalDmmGetError |
Returns error information. |
CalDmmGetInfo |
Returns information on the model and manufacturer of the DMM. |
CalDmmGetInfoEx |
Returns the manufacturer, model number, serial number, control number, calibration date, and firmware version of the DMM. |
CalDmmInitialize |
Initializes the DMM. |
CalDmmMeasure |
Takes a measurement. |
CalDmmReset |
Resets the DMM to power up state. |
CalDmmSetFunction |
Sets the function of the DMM. |
CalDmmSetRange |
Sets the range of the DMM. |
CalDmmSetReadingRate |
Sets the reading rate of the DMM. |
CalDmmSetResolution |
Sets the digits of resolution of the DMM. |
FGEN (Function Generator) Standard Functions |
|
CalFgenGetError |
Returns error information. |
CalFgenGetFrequencyRange |
Returns frequency range of the FGEN. |
CalFgenGetInfo |
Returns information on the model and manufacturer of the FGEN. |
CalFgenInitialize |
Initializes the Function Generator. |
CalFgenSetAmplitude |
Sets the Amplitude of the FGEN. |
CalFgenSetFrequency |
Sets the Frequency Output of the FGEN. |
CalFgenSetOutputState |
Sets Output State of the FGEN. |
CalFgenReset |
Resets the FGEN to power up state. |
FREQREF (Frequency Reference) Standard Functions |
|
CalFreqRefGetError |
Returns error information. |
CalFreqRefGetInfo |
Returns information on the model and manufacturer of the instrument. |
CalFreqRefInitialize |
Initializes the instrument. |
CalFreqRefReset |
Resets the instrument to power up state. |
CalFreqRefSetAmplitude |
Sets the Amplitude of the Frequency Reference. |
CalFreqRefSetFrequency |
Sets the Frequency of the Frequency Reference. |
CalFreqRefSetOffset |
Sets the Offset of the Frequency Reference. |
CalFreqRefSetOutputState |
Sets the Output State of the Frequency Reference. |
CalFreqRefSetWaveform |
Sets the Frequency Reference waveform. |
MATRIX (Switch Matrix) Standard Functions |
|
CalMatrixClose |
Closes a row/column in the Matrix. |
CalMatrixGetDeviceFailedRelay |
Returns the specified relay’s number coil test status and description. |
CalMatrixGetDeviceFailedRelays |
Returns the total number of relays that failed the coil test and status and description for each failed relay. |
CalMatrixGetError |
Returns error information. |
CalMatrixGetInfo |
Returns information on the model and manufacturer of the Matrix. |
CalMatrixGetInfoEx |
Returns the manufacturer, model number, serial number, control number, calibration date, and firmware version of the Matrix. |
CalMatrixInitialize |
Initializes the Matrix. |
CalMatrixOpen |
Opens a row/column in the Matrix. |
CalMatrixReset |
Resets the Matrix to power up state. |
CalMatrixSetMode |
Instrument Specific, sets the Gx6377 board Matrix configuration. |
PS (Power Supply) Standard Functions |
|
CalPsGetChannelState |
Returns the on/off state a channel. |
CalPsGetCurrent |
Returns the current being supplied by a channel. |
CalPsGetCurrentLimit |
Returns the current limit of a channel. |
CalPsGetError |
Returns error information. |
CalPsGetInfo |
Returns information on the model and manufacturer of the Power Supply. |
CalPsGetVoltage |
Returns the voltage being supplied by a channel. |
CalPsInitialize |
Initializes the Power Supply. |
CalPsReset |
Resets the Power Supply to power up state. |
CalPsSetChannelState |
Sets the on/off state of a channel. |
CalPsSetCurrentLimit |
Sets the current limit of a channel. |
CalPsSetVoltage |
Sets the voltage generated by a channel. |
PWRMETER (Power Meter) Standard Functions |
|
CalPwrMeterClose |
Closes connection to Power Meter. |
CalPwrMeterGetError |
Returns error information. |
CalPwrMeterGetInfo |
Returns information on the model and manufacturer of the Power Meter. |
CalPwrMeterInitialize |
Initializes the Power Meter. |
CalPwrMeterMeasure |
Returns a single measurement based on the specified measurement type. |
CalPwrMeterReset |
Resets the Power Meter to power up state. |
CalPwrMeterSetupMeasurement |
Sets the board measurement settings. |
CalPwrMeterZero |
Zeroes the Power Meter. |
REF (Calibrator/Reference Source) Standard Functions |
|
CalRefDmmMeasure |
Takes a measurement. |
CalRefDmmSetFunction |
Sets the currently selected measurement function. |
CalRefDmmSetRange |
Sets the currently selected measurement function’s range. |
CalRefDmmSetReadingRate |
Sets the measurement reading rate in terms of Number of Power Line Cycles. |
CalRefDmmSetResolution |
Sets the measurement resolution. |
CalRefGetCalibrationStatus |
Returns status of the calibrator’s calibration at the specified calibration program duration. |
CalRefGetError |
Returns error information. |
CalRefGetInfo |
Returns information on the model and manufacturer of the Reference. |
CalRefGetInfoEx |
Returns the manufacturer, model number, serial number, control number, calibration date, and firmware version. |
CalRefGetRequiredCalibration |
Returns the specified required calibration status. |
CalRefInitialize |
Initializes the Reference. |
CalRefReset |
Resets the Reference to power up state. |
CalRefSet2Wire |
Sets the 2Wire Reference. |
CalRefSet4Wire |
Sets the 4Wire Reference. |
CalRefSetACCurrent |
Sets the AC Current Reference. |
CalRefSetACVolts |
Sets the AC Voltage Reference. |
CalRefSetDCCurrent |
Sets the DC Current Reference. |
CalRefSetDCCurrentRange |
Sets the output to DC Current Mode. |
CalRefSetDCCurrentRangeMode |
Sets the output to DC Current Range Mode . |
CalRefSetDCVolts |
Sets the DC Voltage Reference. |
CalRefSetDCVoltsLimit |
Sets the output to DC Voltage limit. |
CalRefSetState |
Sets the operational state of the Reference. |
SCOPE (Oscilloscope) Standard Functions |
|
CalScopeGetError |
Returns error information. |
CalScopeGetInfo |
Returns information on the model and manufacturer of the Oscilloscope. |
CalScopeGetInputImpedance |
Returns the channel's input impedance. |
CalScopeInitialize |
Initializes the Scope. |
CalScopeMeasure |
Returns a single measurement based on the specified measurement type. |
CalScopeReset |
Resets the Oscilloscope to power up state. |
CalScopeSetupAcquisition |
Sets the board acquisition settings. |
CalScopeSetupAuto |
Automatically sets the range, offset, coupling, and sample rate based on the input signal. |
CalScopeSetupChannel |
Configures the selected channel settings. |
CalScopeSetupChannelState |
Sets the selected channel state. |
CalScopeSetupHorizontal |
Configures the horizontal and time base settings. |
CalScopeSetupInputImpedance |
Setups the channel’s input impedance. |