GX5961, GX5964
Programs the high-powered chassis power supply state.
GtDio6xPowerSupplySetState (nHandle, nState, pnStatus)
Name |
Type |
Comments |
nHandle |
SHORT |
Session identifier:● Board handle is used when communicating with the hardware. The Board handle session identifier is returned by calling GtDio6xInitialize or GtDio6xSetupInitialization. |
nState |
SHORT |
Used to set the high-powered chassis power supply state. When enabled the VCC, VEE, and VDD modules are powered on:0. GTDIO6X_DISABLED: VCC, VEE, and VDD modules are shut down. 1. GTDIO6X_ENABLED: VCC, VEE, and VDD modules are turned on. |
pnStatus |
LONG |
Returned status: 0 on success, negative value on failure. |
The Marvin Test Solutions Gx7015A and Gx7005A high-powered chassis include a built in, user programmable power supply system. They use a special backplane to deliver high-power to the GX5960 pin electronics via the J5 PXI connector. The power supply is made up of two VCC high rail modules, one VEE low rail module, and one VDD module.
The GX5960 DIO is capable of controlling these modules by setting their voltages, and monitoring their voltage and current output.
See the GtDio6xPowerSupplySetRailsVoltage for a complete example.
GtDio6xPowerSupplyIsSupported, GtDio6xPowerSupplyResetFault, GtDio6xPowerSupplySetState, GtDio6xPowerSupplySetVoltage, GtDio6xPowerSupplySetVoltageRails, GtDio6xGetErrorString