GtDio6xTrigConfigSetRunTrigger

Name

Type

Comments

nHandle

SHORT

Session identifier:

●     Board handle is used when communicating with the hardware. The Board handle session identifier is returned by calling GtDio6xInitialize or GtDio6xSetupInitialization.

●     File handle is used when communicating with a file. The File handle session identifier is  returned by calling GtDio6xFileOpen.

nTriggerSource

SHORT

Set the trigger source as follows:

0.    GTDIO6X_TRIGGER_SOURCE_NONE: No Signal is used as the pause resume trigger source.

1.    GTDIO6X_TRIGGER_SOURCE_AUX_0: Auxiliary channel 0 used as the pause resume trigger source.

2.    GTDIO6X_TRIGGER_SOURCE_AUX_1: Auxiliary channel 1 used as the pause resume trigger source.

3.    GTDIO6X_TRIGGER_SOURCE_AUX_2: Auxiliary channel 2 used as the pause resume trigger source.

4.    GTDIO6X_TRIGGER_SOURCE_AUX_3: Auxiliary channel 3 used as the pause resume trigger source.

5.    GTDIO6X_TRIGGER_SOURCE_AUX_4: Auxiliary channel 4 used as the pause resume trigger source. GX5961 only.

6.    GTDIO6X_TRIGGER_SOURCE_AUX_5: Auxiliary channel 5 used as the pause resume trigger source. GX5961 only.

7.    GTDIO6X_TRIGGER_SOURCE_AUX_6: Auxiliary channel 6 used as the pause resume trigger source. GX5961 only.

8.    GTDIO6X_TRIGGER_SOURCE_AUX_7: Auxiliary channel 7 used as the pause resume trigger source. GX5961 only.

9.    GTDIO6X_TRIGGER_SOURCE_AUX_8: Auxiliary channel 8 used as the pause resume trigger source. GX5296 TTL Input, GX5961 TTL Input/Output.

10.  GTDIO6X_TRIGGER_SOURCE_AUX_9: Auxiliary channel 9 used as the pause resume trigger source. GX5296 TTL Input, GX5961 TTL Input/Output.

11.  GTDIO6X_TRIGGER_SOURCE_AUX_10: Auxiliary channel 10 used as the pause resume trigger source. GX5296 TTL Input, GX5961 TTL Input/Output.

12.  GTDIO6X_TRIGGER_SOURCE_AUX_11: Auxiliary channel 11 used as the pause resume trigger source. GX5296 TTL Input, GX5961 TTL Input/Output.

13.  GTDIO6X_TRIGGER_SOURCE_CH_COMPARE_0: Channel Test Signal 0 used as the pause resume trigger source.

14.  GTDIO6X_TRIGGER_SOURCE_LOCAL_BUS: Domain Resource used as the pause resume trigger source.

15.  GTDIO6X_TRIGGER_SOURCE_PXI_0: PXI Trigger 0 used as the pause resume trigger source.

16.  GTDIO6X_TRIGGER_SOURCE_PXI_1 PXI Trigger 1 used as the pause resume trigger source.

17.  GTDIO6X_TRIGGER_SOURCE_PXI_2 PXI Trigger 2 used as the pause resume trigger source.

18.  GTDIO6X_TRIGGER_SOURCE_PXI_3 PXI Trigger 3 used as the pause resume trigger source.

19.  GTDIO6X_TRIGGER_SOURCE_PXI_4 PXI Trigger 4 used as the pause resume trigger source.

20.  GTDIO6X_TRIGGER_SOURCE_PXI_5 PXI Trigger 5 used as the pause resume trigger source.

21.  GTDIO6X_TRIGGER_SOURCE_PXI_6 PXI Trigger 6 used as the pause resume trigger source.

22.  GTDIO6X_TRIGGER_SOURCE_PXI_7 PXI Trigger 7 used as the pause resume trigger source.

bInvertTriggerSource

BOOL

Set the trigger inverter state as follows:

0.    FALSE: Disable signal inverter, do not modify input signal before testing.

1.    TRUE: Enable signal inverter, invert input signal before testing.

nLevelOrEdge

SHORT

Set the trigger test mode as follows:

0.    GTDIO6X_TRIGGER_ON_LOW_LEVEL: Trigger when a low logic level is detected.

1.    GTDIO6X_TRIGGER_ON_HIGH_LEVEL: Trigger when a high logic level is detected.

2.    GTDIO6X_TRIGGER_ON_RISING_EDGE: Trigger when a rising edge is detected.

3.    GTDIO6X_TRIGGER_ON_FALLING_EDGE: Trigger when a falling edge is detected.

pnStatus

PSHORT

Returned status: 0 on success, negative value on failure.