Gx5731SetStrobeToPxiTriggerBusState

Gx5731SetStrobeToPxiTriggerBusState (nHandle, nBusState, pnStatus)

Name	Type	Description
nHandle	SHORT	Handle to a GX5731 board.
nBusState	SHORT	Sets all eight Strobe to Pxi Trigger Bus lines Output mode, 8 bits integer where each bit represents a Pxi Trigger line. Bit 0 for line 0 and bit 7 for line 7. A high (‘1’) means the corresponding Pxi Trigger line is enable, low (‘0’) means the corresponding Pxi Trigger line is disabled.
pnStatus	PSHORT	Returned status: 0 on success, negative number on failure.

Use the Gx5731SetStrobeToPxiTriggerBusState to set a specified Pxi Trigger Line output.

The following example sets all eight Strobe to Pxi Trigger Bus lines output mode to 0x5:

SHORT nStatus;

Gx5731SetStrobeToPxiTriggerBusState (nHandle, 0x5, &nStatus);