Gx5733GetStrobeToPxiTriggerBusState

Returns all Strobe to PXI Trigger lines Output Mode.

Gx5733GetStrobeToPxiTriggerBusState (nHandle, pnBusState, pnStatus)

Name	Type	Description
nHandle	SHORT	Handle to a GX5733 board.
nPort	PSHORT	Returned all eight Strobe to PXI Trigger Bus lines Output mode, 8 bits integer where each bit represents a PXI Trigger line. Bit 0 for line 0 and bit 7 for line 7. A high (‘1’) means the corresponding PXI Trigger line is enable, low (‘0’) means the corresponding PXI Trigger line is disabled.
pnStatus	PSHORT	Returned status: 0 on success, negative number on failure.

Use the Gx5733SetPxiTriggerLineOutputMode to set a specified PXI Trigger Line output.

The following example Returned all eight Strobe to PXI Trigger Bus lines output mode:

SHORT nBusState, nStatus;

Gx5733GetStrobeToPxiTriggerBusState (nHandle, &nBusState, &nStatus);