IO Tables - WinSock Interface

Garry B.
Tucson, AZ

May 24, 2021
7 Posts

0 ✔  |  ✗ 0  

Re: IO Tables - WinSock Interface

Are there any examples using IO Tables with the WinSock Interface and Server selected?

Solution Available
DrATEasy (Ron Y.)
Mission Viejo, CA

May 24, 2021
358 Posts

1 ✔  |  ✗ 0  

Re: IO Tables - WinSock Interface

There is no example for WinSock with IO Table interface that comes with ATEasy.
There are two example WinSocIE (using interface event) and WinSockMT (using multi threaded) that act as a server so you can use then as guidelines. Both are using the Internal WinSock functions.
In general, you first setup the driver WInSocket interface as a server and that you configure the driver shortcut to Winsock and set the parameters. You can select Auto Accept with forever timeout to wait forever until client connect alternatively you can use the accept method mention in the examples above.

*Changed by Moderator



Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]