ATEasy Driver for Abaco Systems/GE/Condor Engineering CEI-x30 ARINC products

Solution Available
Tero S.
Irvine, CA

Aug 14, 2020
16 Posts

2 ✔  |  ✗ 0  

Re: ATEasy Driver for Abaco Systems/GE/Condor Engineering CEI-x30 ARINC products

CEI-x30 ARINC product line includes: {
RCEI-539
RAR-PCIE
RAR-MPCIE
RAR-CPCI
RAR-XMC
RAR-EC
CEI-830
RCEI-830A
R830RX
CEI-430
RCEI-430A
AMC-A30
RCEI-830X820
}

Driver uses cdev_api.dll provided by CEI-x30 software installation, currently available by Abaco Systems here:
https://www.abaco.com/products/rar-cpci-interface#panel-downloads


File Attachment:
 Ceix30.zip

Brandon C.
Grapevine, TX

Aug 22, 2021
2 Posts

0 ✔  |  ✗ 0  

Re: ATEasy Driver for Abaco Systems/GE/Condor Engineering CEI-x30 ARINC products

The included attachment is a "pre-built" ATEasy driver correct? I would download and test ASAP but it's a Sunday and my test equipment is at work...

Dale J.
La Verne, CA

Aug 23, 2021
21 Posts

0 ✔  |  ✗ 0  

Re: ATEasy Driver for Abaco Systems/GE/Condor Engineering CEI-x30 ARINC products

Brandon,
The Ceix30.drv is an ATEasy driver originally written for the Condor ARINC 429 instrument.  GE Fanuc acquired Condor Engineering's test and simulation products, including their ARINC 429 products, which were subsequently acquired by Abaco.  It appears that the Abaco installation is the same as the Condor software that the ATEasy driver was written for.

Assuming the CEI-x30-SW v5.10 uses the same DLL interface (no reason to believe otherwise), the ATEasy driver should work.

Regards,
Dale

Brandon C.
Grapevine, TX

Aug 25, 2021
2 Posts

0 ✔  |  ✗ 0  

Re: ATEasy Driver for Abaco Systems/GE/Condor Engineering CEI-x30 ARINC products

Dale J. wrote:
Brandon,
The Ceix30.drv is an ATEasy driver originally written for the Condor ARINC 429 instrument.  GE Fanuc acquired Condor Engineering's test and simulation products, including their ARINC 429 products, which were subsequently acquired by Abaco.  It appears that the Abaco installation is the same as the Condor software that the ATEasy driver was written for.

Assuming the CEI-x30-SW v5.10 uses the same DLL interface (no reason to believe otherwise), the ATEasy driver should work.

Regards,
Dale


Dale, the issue I'm having is there was not an appropriate driver installed on this, it seems the installation of the Windows drivers was completed, but nothing on the side of ATEasy. I found ATEasy files for a ceix20, but not a ceix30. I need the files for ceix30 from what I understand.



Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]