Vector Directions change after long duration of testing

Chris G.
McClellan, CA

Jan 23, 2024
1 Post

0 ✔  |  ✗ 0  

Re: Vector Directions change after long duration of testing

I am trying to set up a test that runs back-to-back tests over an extended period of time. One of the major issues I have come across is the direction for each channel will either, shift or go completely random. I am currently initializing the gx5295 card at the beginning of each test, then loading the tests vectors with directions and settings. at the end of the test I am resetting the boards. When this issue occurs, the issue sticks around until I reset the computer. any Ideas on what could be causing this?

DrATEasy (Ron Y.)
Mission Viejo, CA

Jan 23, 2024
358 Posts

0 ✔  |  ✗ 0  

Re: Vector Directions change after long duration of testing

This is a GX5295/GtDio/DioEasy support question. Please create a magic incident for that so we can support you better. You will find it under the Support menu in our website.

Regards,
Ronnie



Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]