MOXA NPort 5410 Driver / I2C

Nancy M.
Tewksbury, MA

Jun 16, 2025
1 Post

0 ✔  |  ✗ 0  

MOXA NPort 5410 Driver / I2C

Would someone here be able to create a Moxa NPort 5410 driver for I2C communication? Or point me to some references or starting points please. Thank you in advance.

Would like to understand how this is connected in our setup. I do not see this device under drivers in ATEasy. It's setup under NPort administrator application. Not in NIMAX like the rest of our drivers. In NIMAX the drivers in ATEasy are listed under NI Switch Executive Virtual Devices. And this device is listed under Serial and Parallel (NIMAX). Would like to understand how this works in the system. MOXA NPORT is RS232 and the path is navigating to I2C communication in our UUT.

Birds eye view -- PC <-> ETH switch <-> MOXA NPORT5410 <-> custom hardware <-> UUT (I2C)

Goal is to have I2C communication and the codes not working.

Thanks for your help.
Nancy



Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]