Description
The GP1616H function generator is a programmable instrument capable of generating predefined Sine, Square, Triangle, Ramp, Haversine, Haver triangle and Pulse waveforms as well as a programmable DC output. The firmware is customized to be fully compatible with the HP 8116A GPIB command set. Software test procedures using the original HP8116A instrument require no code modification when upgrading to the GP1616H.
Features
The GP1616H offers phase-lock loop (PLL) stability and accuracy for generating signals up to 50 MHz. Full programmability of all waveforms as well as pulse width and duty cycle parameters are supported.
Additionally, the GP1616H supports internal / external logarithmic sweep and counted burst functionality. Frequency, amplitude, and pulse width modulation modes are also supported when used with an external modulation source.
Applications
- Automatic Test Equipment (ATE)
- Component Analysis
- Communication Signals
- Process Control
- Sonar
GP1616H Series Specifications
| Operating Modes |
|---|
| Continuous | Continuous waveform is generated, phase locked to an internal crystal reference |
| Trigger | Active input edge generates one output cycle.
Trigger slope: Positive or negative
Minimum pulse width: 10 ns
Minimum amplitude: 500 mVPP
Input impedance: 10 kΩ |
| Gate | Active level enables output cycles. First and last output cycles are always completed. |
| Counted Burst | A preprogrammed number of output cycles (1 to 1999) are generated. Minimum time between bursts is 100 ns when triggered by an external trigger. |
| Logarithmic Sweep | Provides logarithmic up / down sweep between start and stop frequencies. Sweep time per decade is selectable between 10 ms and 500 sec |
| Timing Parameters |
|---|
| Frequency | 0.001 Hz - 50 MHz, sine, square, triangle, and pulse |
| Resolution | 3 digits |
| Accuracy | 50 ppm |
| Jitter | < 0.1% + 100 ps |
| Stability | 50 ppm |
| Duty Cycle | 10% to 90% in 1% steps, < 1 MHz
20% to 80% in 1% steps, 1 MHz to 10 MHz
50% fixed, 10 MHz to 50 MHz |
| Output Characteristics |
|---|
| Range | 10 mV - 16 VPP into 50 Ω |
| Resolution | 3 digits |
| Accuracy | ±5% at 1 kHz. sine, triangle and square |
| Waveforms | Sine, Triangle, Pulse, Square |
| Output Modes | Complement, disable, output limit |
| DC Ouput |
|---|
| Range | 0 to ± 7.95 V into 50 Ω |
| Resolution | Up to 6 digits limited to 0.1 ns |
| Accuracy | ±2% of setting ± 2 ns |
| Jitter | < 0.1% of setting + 50 ps,
decreasing to 0.005% on slowest range |
| Duty Cycle |
|---|
| Range | 1 to 99% |
| Resolution | 3 digits |
| Accuracy | ±0.5% setting, ±40 mV |
| Waveform Performance |
|---|
| Sine THD | < -45 dBc, 10 HZ to 100 kHz
< -40 dBc, to 1 MHz
< -30 dBc for frequencies > 1 MHz |
Triangle and Ramp
Non-Linearity | < ±3%
(10% to 90% of amplitude, 100 mHz to 1 MHz) |
| Square and Pulse Transition Time | < 7 ns, 10% to 90% |
| Pulse Aberrations | < ±5% of amplitude |
| Modulation |
|---|
| FM | Deviation: > ±5% (max) for ±6 V input
Mod bw: DC to 20 kHz |
| AM | Modulation: 100%, ±2.5 V input
Mod bw: DC to 20 kHz |
| Pulse Width | Range: Maximum of one decade with ± 6.5 V input
Pulse width range: 10 ns to 1 s, in eight decade ranges |
| Inputs And Outputs |
|---|
| Trigger Output | > 2 V into 50 Ω 50 Ω impedance |
| External Trigger | Threshold level: TTL levels
Trigger slope: pos or neg
Minimum pulse width: 10 ns
Input impedance: 10 kΩ |
| Modulation Input | Maximum ±20 V, 10 kΩ impedance |
| Main Ouput | Range: ±8 V into 50 Ω |
| Marker Output | High level: > 2 V into 50 Ω
Low level: 0 V
Edges: Positive at marker frequency
Negative at start of sweep |
| X-Ouput | Levels: 0 V to 10 V, 1.5 V per sweep decade
into Hi Z. |
| General |
|---|
| Power Requirements | 100 - 240 V selectable, 50 VA (max) |
| Weight | 3.5 kg |
| Dimensions | 89 mm H x 213 mm W x 30 cm L (3.5" x 8.4" x 12") |
| Operating Temperature | 0 °C to +50 °C |
| Humidity | To 95% RH, 0 °C to +40 °C |
Note: Specifications are subject to change without notice.
Knowledge Base Articles pertaining to GP1616H Series
Form/Fit/Function replacement of legacy instrumentation provides a superior solution that preserves investment in ATE hardware and TPS's
Read more...
Downloads for GP1616H Series
GP1616HDS.pdf
Mar 8, 2023
version: C
322.04 KB
GP1616HUG.pdf
Dec 7, 2007
754.67 KB
GP1616H_Vol.pdf
May 21, 2018
143.59 KB
LegacyReplacementSolutions.pdf
Apr 26, 2017
version: B
1.79 MB
Download our PXI Catalog
Products similar to GP1616H Series
- GP1552A Series - Dual Channel, 50 MHz Programmable Pulse Generator - HP 8160/HP 8160A, Wavetek 859 Compatible
- GP1612 Series - Programmable Pulse Generator - HP 8112A Compatible
- GP1650W - Arbitrary Waveform Generator - Wavetek 175 compatible
- GP1665H Series - Programmable Function Generator, HP8165/8165A Compatible
- GP1665W - Programmable 50 MHz Waveform Synthesizer - Wavetek 178 Compatible
Order GP1616H Series and Related Products
To order call
1-888-837-8297
or order on-line via the form below. Prices are specified for
USA
destination orders. Prices are noted in USD.
Import duties, taxes, and charges are not included in the item price.