*****Product Availability*****
This product has been discontinued.The initial release of this product was approximately 1990.Please contact the factory for availability and alternate product offerings.Please review the GX52xx Series for the latest product alternatives.Description
The GT5150 is a Dynamic Digital Input or Output card design to capture or stimulate long patterns at rates up to 50 MHz. The GT5150 architecture will accommodate eight memory SIMMs for a total of 128 Mb of memory behind selected input or output pin.
Architecture
The GT5150 provides 32 digital Inputs or Outputs for real time capturing or stimuli. Up to eight cards can be daisy-chained for a total of 256 pins.
- Memory - The GT5150 can accommodate up to 9 memory SIMMs. Each SIMM provides 1 Mb, 2 Mb, or 4 Mb per pin, for a maximum of 32 Mb. The GT5150 architecture enables the user to stack the memory to reconfigure the GT5150 as a 16-pin I/O with 64 Mb depth or an 8-pin I/O providing a maximum of 128 Mb behind each pin. Due to the variety of memory sizes available, the basic GT5150 board does not come with memory. The minimum requirement to add is two SIMMs, one for data and one for control.
- Sequencer - The sequencer, residing in the the 9th SIMM, enables a conditional or unconditional JUMP to two predefined addresses and PAUSE commands. The sequencer commands can be applied every eighth step.
- Clock - The Clock and Strobe signals originate on the timing module and are distributed to the slave GT5150 via a ribbon cable. These signals can be provided externally for full synchronization with external events.
- Trigger - The Trigger signal initiates the execution of vector capturing (or vector stimuli). The multiple software and hardware trigger sources provide flexibility in synchronizing the GT5150 with real world events.
- I/O Modules - The GT59x0 I/O Module is a plug-in unit that piggybacks on the GT5150 PCB. The following I/O modules are currently available for the GT5150: GT5910 - TTL I/O Module, GT5920 - 100MHz I/O Module, GT5930 - Programmable Level I/O Module, GT5940 - PECL I/O Module.
Configuration
The Timing Module is mounted on the GT5150 to create a master. Up to seven additional GT5150 slave cards can be driven by one master to form a 256-bit wide vector.
The GT5150 is provided without memory. Up to 8 memory SIMMs can be configured. Memory SIMMs are available in the following formats:
- 1 Mb x 32
- 2 Mb x 32
- 4 Mb x 32
All memory SIMMs should be identical. A ninth memory SIMM, serving the sequencer, is added (should match the I/O memory.)
The plug-in I/O modules should be selected to meet the application requirements. The default is the GT5910 TTL Module.
Programming and Software
The The board is supplied a 32-bit DLL driver. Various interface files provide access to the DLL from programming tools and languages such as ATEasy, LabVIEW, C/C++, Microsoft Visual Basic®, Delphi, and more. The available virtual panel can be used to interactively adjust and control the instrument from a window that displays the current instrument settings and measurements.
On-Line help file and PDF User's Guide provides documentation that includes instructions for installing, using and programming the board
Applications
- Automatic Test Equipment (ATE)
- High speed digital pattern capture
- High speed digital pattern generation
- CCD testing
GT5150 Series Specifications
| Timing Module | Minimum | Maximum |
|---|
| Internal Test Clock |
| Frequency Range | 5 Hz | 50 MHz |
| Resolution | The greater of 1 Hz or 0.01% |
| Internal B Clock |
| Frequency Range | 1 MHz | 100 MHz |
| Resolution | The greater of 1 Hz or 0.2% |
| External Clock |
| Direct | 0 Hz | 50 MHz |
| Ref for Prog. | 1 MHz | 60 MHz |
| Pulse Width | 10 ns | |
| Low Input Level | -0.1 V | -0.1 V |
| High Input Level | -2.0 V | -2.0 V |
| External Events |
|---|
| Setup Time |
| For Triggering | 1 Clk cycle | 2 Clk cycles |
| For Conditions | 2 Clk cycles | 3 Clk cycles |
| Physical |
|---|
| Size | 4.1" x 4.5" |
| Weight | 100 g |
| Supply Current |
|---|
| @ 5 VDC | 200 mA | 500 mA |
| @ 12 VDC | 50 mA | 100 mA |
| Input / Output |
|---|
| Channels Per Module | 3 Programmable configurations:
8-bit, 16-bit, and 32-bit I/O |
| I/O Memory |
|---|
| W/1 Mb SIMMs | 1 Mb | 8 Mb |
| W/2 Mb SIMMs | 2 Mb | 16 Mb |
| W/4 Mb SIMMs | 4 Mb | 32 Mb |
| Physical |
|---|
| Operating Temperature | 0 °C to +50 °C |
| Storage Temperature | -20 °C to +70 °C |
| Size | 13.2" x 4.8" (Full Size ISA Card) |
| PC Slot Type | ISA (16-bit) |
| PC Interface | Win95/NT Plug and Play or Legacy (Selectable) |
| Weight | 475 g |
Note: Specifications are subject to change without notice.
Knowledge Base Articles pertaining to GT5150 Series
List of changes in GTDIO/DIOEasy Software version 3.20 build 42
Read more...
Downloads for GT5150 Series
Datasheet
GT5150_DS.pdf
Feb 20, 2023
version: A
120.75 KB
Setup/Package
GTDIO3.exe
Apr 11, 2007
version: 3.0.32.0
26.93 MB
Most recent Setup/Package
This Setup / Package file contains all necessary files (including user's guide, help, etc).
Expand
to view And download individual files included in the setup.
Manual
GT5150UG.pdf
Aug 14, 2013
version: 3.0
1.28 MB
On-Line Help
GtDio3.chm
Mar 29, 2006
version: 3.0
6.37 MB
Download our PXI Catalog
Products similar to GT5150 Series
- DIOEasy - Digital I/O Vector Development Software
- DIOEasy Training - DIOEasy Training (Customer or Marvin Test Solutions Site)
- GX5150 Series - Dynamically Controlled High Speed Digital I/O PXI Card
Order GT5150 Series and Related Products
To order call
1-888-837-8297
or order on-line via the form below. Prices are specified for
USA
destination orders. Prices are noted in USD.
Import duties, taxes, and charges are not included in the item price.
GT5150 Series
I/O Module (select one)
Memory (select three or more)
| Product |
Description |
Price, |
Qty |
|
GT5001
|
GT515X Memory Module, 1Mbx32, for 50MHz applications. 2-9 modules per GT515X.
(Required)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT5002
|
GT515X Memory Module, 2Mbx32, for 50MHz applications. 2-9 modules per GT515X
(Required)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT5004-40
|
GT515X Memory Module, 4Mbx32, for 40MHz applications. 2-9 modules per GT515X.
(Required)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT5006
|
GT515X Memory Module, 256Kbx32, for 25/50MHz applications. 2-9 modules per GT515X.
(Required)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT60-256K
|
256K memory for 60 MHz applications
(Required)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT5006-5
|
GT515X Memory Module, 256Kbx32, for 25/50MHz applications. 2-9 modules per GT515X (Qty > 5)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT5001-5
|
GT515X Memory Module, 1Mbx32, for 50MHz applications. 2-9 modules per GT515X (Qty > 5)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT5002-5
|
GT515X Memory Module, 2Mbx32, for 50MHz applications. 2-9 modules per GT515X (Qty > 5)
|
Call for Pricing
|
*Valid Quantity Required
|
|
GT5004-40-5
|
GT515X Memory Module, 4Mbx32, for 40MHz applications. 2-9 modules per GT515X (Qty > 5)
|
Call for Pricing
|
*Valid Quantity Required
|
Software
Accessory